Mold remediation cost in Wilmington, NC
Prices depend on how much mold there is, where it is and what has to be removed. Here are published figures for Wilmington and nationally to help you judge an estimate.
Call (855) 671-5199Wilmington, NC figures
Two cost sites publish Wilmington-specific numbers. Both are lead-generation sites, so treat them as ballparks rather than quotes, and note their dates.
| Source | What it says for Wilmington | Notes |
|---|---|---|
| HomeAdvisor | Average $1,694; typical range $897 to $3,433; low to high $350 to $3,800 | No data period stated; most recent review on the page is February 2024 |
| HomeBlue | $11 to $21 per square foot. About $1,100 to $2,100 for 100 sq ft; $5,300 to $10,500 for 500 sq ft; $10,500 to $21,000 for 1,000 sq ft | Dated March 2022 |
Local figures sit close to the national ones below. HomeBlue says prices rise when mold comes with flood damage, when materials must be fully replaced, when disposal is significant, when foundation or water mitigation work is needed, or when access is difficult. They fall when the work is cleaning only, with little drywall replacement and easy access.
Quick ballpark estimator
Enter the size of the affected area. This uses the published per-square-foot ranges above and is a rough guide, not a quote.
Small jobs may have a minimum charge, and rebuilding, flood damage or hidden mold can add to the cost. Ask for a written estimate.
National averages
These figures come from two published cost guides. They are national numbers, not quotes for Wilmington, and your job could cost less or more. Use them to see whether an estimate is in a normal range.
| Source | Average | Typical range |
|---|---|---|
| Angi | $2,364 | $1,223 to $3,749 (full range $375 to $7,000) |
| Bob Vila | $2,254 | $1,125 to $3,439 (citing Angi and HomeAdvisor) |
Cost per square foot
Both guides give $10 to $25 per square foot for professional removal. For example, 100 square feet would cost roughly $1,000 to $2,500 at those rates.
Cost by location in the home (Angi)
| Location | Typical cost |
|---|---|
| Crawl space | $500 to $2,000 |
| Basement | $500 to $3,000 |
| Bathroom | $500 to $1,000 (over $8,000 if the mold is behind fixtures or walls) |
| Attic | $1,000 to $4,000 (up to $7,000 for large or long-undetected roof leaks) |
| Air ducts | $600 to $2,000 |
| HVAC system | $3,000 to $10,000 |
| Walls | $1,000 to $20,000 |
| Whole house | $10,000 to $30,000 |
Related costs that can add to the bill
- Drywall repair: $300 to $825 (Angi)
- Carpet replacement: $775 to $2,600 (Angi)
- Water damage restoration: $1,200 to $5,000 (Bob Vila)
- Crawl space encapsulation: $1,500 to $15,000 (Angi)
- Inspection and testing: see the inspection and testing guide
What changes the price
- Location and how easy the area is to reach
- The size of the problem
- Mold type and the protective equipment required. Angi says black mold may raise the cost.
- How much drywall, flooring or carpet has to be removed and replaced
- Whether the water problem that caused it has to be repaired too
- Local labor. Bob Vila puts labor at about 60 percent of the cost and materials at about 40 percent.
Doing it yourself
Angi puts a DIY approach at roughly $50 to $300 for supplies, and notes that the EPA recommends DIY removal only for areas under 10 square feet. See can I clean mold myself?
Insurance
Bob Vila says coverage is case by case and generally applies only when a covered peril caused the mold. See mold and homeowners insurance.
Getting an estimate you can compare
- Ask for the estimate in writing, with the scope itemized.
- Ask what caused the moisture and how it will be fixed.
- Ask which materials will be removed and who replaces them.
- Ask how they will confirm the area is clean and dry afterward.
Figures are from Angi and Bob Vila and may change. Wilmington Mold Help does not set prices. Independent companies give their own estimates.
Common questions
Is the price per square foot or per job?
Both are used. Guides quote $10 to $25 per square foot for larger areas, and many companies give a job estimate based on area, materials removed and equipment.
What does mold removal cost in Wilmington specifically?
HomeAdvisor shows an average of $1,694 and a typical range of $897 to $3,433 for Wilmington, NC, and HomeBlue shows $11 to $21 per square foot (dated March 2022). These are lead-generation sites, so treat them as ballparks.
Why do prices vary so much?
Location in the house, size, mold type, accessibility, local labor and how much damaged material has to be replaced all move the price.
Does the estimate include rebuilding?
Often not. Removing and replacing drywall, flooring or insulation may be priced separately, so ask what is and is not included.
Should I get more than one estimate?
If time allows, yes, and compare the scope as well as the price. Ask what caused the moisture and how it will be fixed.
Found mold or a leak? Call and we will connect you with an independent local mold remediation or restoration company, day or night, subject to availability.
Call (855) 671-5199Calling is free. Ask the company for an estimate before work begins.