Home Mold in walls and ceilings

Mold in walls and ceilings in Wilmington, NC

Mold on drywall is often the visible end of a bigger moisture problem behind it. A stain that grows after rain, or a wall that smells, deserves a closer look.

Call (855) 671-5199

We are a referral service. An independent local company does the work.

Signs to look for

Do this first

  1. Find the source: plumbing in the wall, a roof or window leak, an AC line, or condensation.
  2. Do not paint, caulk or cover it.
  3. Do not cut into the wall yourself unless you know what is behind it. Spores spread easily.
  4. Photograph the area and mark its size with a pencil so you can see if it grows.
  5. If it covers more than about 10 square feet, or you cannot find the cause, call a professional.

What a professional usually does

A professional uses a moisture meter and sometimes a thermal camera to map damp areas, opens the wall where needed, removes damaged drywall and insulation, cleans framing and dries the cavity. Replacement of drywall and paint is often a separate step.

For more, see the EPA guide to mold and moisture.

Insurance and cost notes

Angi lists $1,000 to $20,000 for walls, depending on how far the mold spread. Drywall repair is listed at $300 to $825. Insurance depends on the cause of the water.

Not sure what you are dealing with? Call and describe it. Call (855) 671-5199

In the Wilmington area

In a humid climate, a wall that stays damp does not dry on its own. If you have had plumbing or roof leaks, or storm damage, check moisture readings before repainting.

Common questions

What does mold in a wall or ceiling look like?

Brown or yellow stains, dark spots, bubbling or peeling paint, soft drywall and a musty smell. Sometimes you see nothing except the smell.

How much does mold in walls cost to remove?

Angi lists $1,000 to $20,000 for walls, depending on how far it spread and how much has to be replaced. Drywall repair is listed at $300 to $825.

Can I just paint over a stain?

No. If moisture is still present, mold grows back through the paint, and the cause stays hidden. Find the leak first.

How do I know if the wall is still wet?

A moisture meter can tell. A professional uses one to find damp areas behind surfaces, and may use a thermal camera.

Have this ready when you call

Having this ready usually makes the call shorter and the estimate more accurate.

Found mold or a leak? Call and we will connect you with an independent local mold remediation or restoration company, day or night, subject to availability.

Call (855) 671-5199

Calling is free. Ask the company for an estimate before work begins.

Call (855) 671-5199